What gear should you remain in when towing a trailer?

Towing Dublin ( We offer 24 hr towing roadside help in Dublin and its surrounding areas and a series of lorry rescue services. No matter what the problem is, we will enjoy to send out a completely equipped tow truck to you with a professional and trained tow truck driver to help you.

How to Correctly Tow a Car

You may require to tow an automobile for a number of factors, consisting of moving, taking your automobile along on a trip, or transferring it to another location. Whatever your reason for towing a vehicle, you need to know how to effectively tow it. You can utilize some easy-to-follow standards to make the entire towing procedure much easier.

Caution: Ensure to follow all local laws, along with the laws of any other states you intend on taking a trip through when towing a car. This includes using the appropriate towing lights and mirrors.

Method 1 of 3: Utilizing a tow dolly

A tow dolly lets you to tow a car while permitting the towed automobile to take some of the load off the towing vehicle. This is accomplished by letting the rear wheels rest on the ground while you tow the vehicle. This works better when towing is front wheel drive car, because a rear wheel drive, or 4 wheel drive, requires you to detach the drive shaft while traveling fars away.

Suggestion: The lorry you are towing with should weigh, at a minimum, 750 pounds more than the automobile it is towing, plus the towing gadget. Guarantee that you do not surpass the tow capability of the device.

Using a tow dolly
Action 1: Connect the tow dolly. Connect the tow dolly coupler to the hitch ball on the towing automobile.

This requires you to properly seat the coupler on the drawback ball and hand tighten up the coupler until you have a safe and secure and tight connection.

Inspect that the coupler is securely secured by moving the tow lorry forward somewhat or pressing the dolly to the back.

Attach the security chains from the dolly to the tow lorry. If the coupler comes off the drawback ball, this keeps the dolly linked to the tow lorry even.

Suggestion: When towing a vehicle fars away, check the hitch connection frequently to ensure it is still effectively connected.

Connect the tow dolly
Action 2: Load the towed car. Drive the towed automobile onto the dolly ramp dealing with forward.

Warning: Facing the vehicle to the rear can trigger the towed lorry to whip and sway.
Ensure that the entire width of the towed lorry fit on the ramps. Likewise, check all clearances, such as for spoilers, air dams, and other automobile parts while filling.

Load the towed vehicle

Action 3: Protect the towed lorry. Continue driving onto the dolly up until both the front tires are firmly against the wheel stops.

Utilizing the tire straps on the tow dolly, front both protected tires.

Loop the towed lorry security chains around a frame member on the towed vehicle. Keep the chains far from fuel and brake lines to prevent damage to these elements.

Step 4: Disconnect the driveshaft. On rear-wheel-drive and four-wheel-drive vehicles, you require to detach the driveshaft to keep from harming the transmission of the towed lorry.

You require to crawl below the lorry and locate where the driveshaft links to the differential.

Look for the u-joint that holds the driveshaft to the differential real estate when you have actually found the connection point of the driveshaft and differential.

Secure the driveshaft to the undercarriage of the towed car utilizing a strap or bungee cable. Make certain it is protected to a firm part of the frame, but not the exhaust pipes.

Get rid of the four bolts at the u-joint. Next, push the drive shaft up as far as possible, changing the strap or bungee cord as required.

Screw the bolts back into the yoke on the differential real estate. You can put them in a baggie in the glove box up until required again.

Repeat the above steps for the other axle, such as on a 4 wheel drive, if needed.

Call a professional mechanic to detach the driveshaft if you do not feel confident in doing the job yourself.

Method 2 of 3: Utilizing a trailer

Product Needed

  • Nylon straps or wheel nets

Another method of towing a vehicle is to utilize a trailer. While more secure than other techniques, a trailer has its own drawbacks, the main one that the mix of the towed lorry and trailer might be too heavy for the towing car to manage.

Warning: It is important that you understand the tow rating of the tow car. Make certain it is rated to haul the weight of the lorry and the trailer used to transport it.

Material Needed
Action 1: Attach the trailer: First, you should firmly attach the trailer to the hitch ball of the tow automobile.

Make sure the trailer coupler is firmly connected to the drawback by driving the tow car forward somewhat.

Connect the safety chains from the trailer to the tow lorry.

Connect the trailer electrical wiring harness to the tow lorry sockets.

If the trailer comes with a brake battery, check its charge prior to setting out on a trip.

Action 2: Load the lorry. Next, extend the trailer ramps and drive the towed automobile onto the trailer.

The towed vehicle and drive it gradually up the ramps.

Continue driving until the front tires are resting against the tire stops at the front of the trailer.

Place the automobile in park and set the parking brake.

Load the vehicle

Action 3: Secure the automobile. The last step involves securing the towed car to the trailer.

Using nylon straps or wheel internet, place the straps over the center of the front tires. Ratchet the strap down up until tight.

Fasten the security chains to the front and back of the vehicle frame, making certain to avoid brake and fuel lines.

Technique 3 of 3: Using a tow bar

Another method for towing an automobile is to use a tow bar. Tow bars enable all 4 wheels of the towed automobile to rest on the ground while moving. When using a tow bar, you need to disconnect the driveshaft to keep from damaging the transmission. Frequently, tow bars are used in tandem with a RV to tow a car for usage while traveling cross nation.

Caution: Using a tow bar requires that you attach brackets to the front frame of the towed vehicle. If you do not feel comfortable doing this yourself, have a specialist mechanic or vehicle body specialist attach the brackets for you.

Using a tow bar
Action 1: Secure the brackets. Utilizing the tow bar as a guide, find a strong part of the car frame to attach a bracket on each side of the front of the towed car.

This requires you to drill into the frame of your car.

Completion result is 2 brackets to which you can attach and separate the tow bar rapidly.

Step 2: Inspect the brake lights. Before linking the tow bar, make sure that the brake lights and turn signals of both car work in tandem, or use removable tail lights.

Purchase an electrical wiring system that links and collaborates the brake lights and turn signals of both lorries. Standard vehicles us a 12N electrical system for this purpose, while RVs utilize a 12S electrical system.

You can opt to utilize detachable tail lights if you do not prepare on towing the car that often. Removable tail lights connect to the rear of the towed automobile and use the electrical system of the tow automobile for braking and signaling turns.

Step 3: Attach the tow bar. Next, attach the tow bar to the towing car.

Start by attaching the tow bar brackets on the towed vehicle. You can do this by sliding the bolts through the ends of the tow bar that attach to the brackets connected to the car. Even more protect the bolts using washers and nuts that represent the bolts size. Utilize a socket wrench to tighten up.

Next, connect the two tow bars originating from the brackets on the towed automobile to the pivot bracket utilizing the bolt, nuts, and washers that come with the tow bar. The pivot bracket connects to the part of the tow bar that either inserts straight into the hitch receiver or has a coupler that attaches to the hitch ball.

Even more secure the tow bar by attaching security chains from the tow vehicle to the pivot bracket and from the base plate of the pivot bracket to the towed vehicle.

You can tow a lorry safely and quickly by keeping specific safety measures in mind. This includes effectively connecting towing devices, such as tow dollies, trailers, and tow bars, and ensuring that you correctly secure automobiles prior to towing.

You may need to tow a lorry for a number of reasons, including moving, taking your automobile along on a trip, or carrying it to another area. Whatever your factor for towing a car, you need to understand how to properly tow it. A tow dolly lets you to tow a car while enabling the towed automobile to take some of the load off the towing vehicle. Another method for towing a vehicle is to use a tow bar. A lot of often, tow bars are utilized in tandem with a Recreational Vehicle to tow a car for use while traveling cross nation.

Give us a call in Dublin on 087 6555561 today to get more information about our tow services. If you require emergency situation roadside recovery for any factor, we’re here to help you.

The towing source might be a motorized land lorry, vessel, animal, or human, and the load being anything that can be pulled. Historically, barges were transported along canals or rivers utilizing tow ropes drawn by guys or draught animals walking along towpaths on the banks. Aircraft can tow other airplane.

Related Articles


If you need emergency car recovery in DUBLIN, you can depend on us. All of our chauffeurs are insured and licensed and put the consumer. You’ll understand that we’ll be with you ASAP in order to get you and your broken down automobile to security when you call us. Your vehicle will be completely safe with our DUBLIN towing business, and we can take it to the regional garage of your choice. We likewise provide

Our Videos

Our Office Location:

Areas We Cover

Important Links

Call Now Button Scroll to Top