How do you tow correctly?

Towing Dublin ( We provide 24 hr towing roadside assistance in Dublin and its surrounding locations and a range of vehicle rescue services. No matter what the concern is, we will more than happy to send a fully geared up tow truck to you with a qualified and professional tow truck driver to help you.

How to Correctly Tow a Lorry

You may require to tow a lorry for a number of factors, consisting of moving, taking your lorry along on a trip, or transporting it to another location. Whatever your reason for towing a vehicle, you require to understand how to properly tow it. You can use some easy-to-follow standards to make the entire towing procedure much easier.

Warning: Make certain to follow all local laws, in addition to the laws of any other states you plan on taking a trip through when towing an automobile. This consists of using the proper towing lights and mirrors.

Technique 1 of 3: Using a tow dolly

A tow dolly lets you to tow an automobile while permitting the towed automobile to take a few of the load off the towing car. This is accomplished by letting the rear wheels rest on the ground while you tow the automobile. This works better when towing is front wheel drive lorry, given that a rear wheel drive, or four wheel drive, requires you to disconnect the drive shaft while traveling cross countries.

Pointer: The car you are towing with should weigh, at a minimum, 750 pounds more than the vehicle it is towing, plus the towing device. Guarantee that you do not exceed the tow capacity of the gadget.

Using a tow dolly
Action 1: Connect the tow dolly. Attach the tow dolly coupler to the hitch ball on the towing automobile.

This requires you to properly seat the coupler on the hitch ball and hand tighten the coupler till you have a safe and tight connection.

Inspect that the coupler is securely attached by moving the tow automobile forward somewhat or pushing the dolly to the back.

Attach the safety chains from the dolly to the tow automobile. If the coupler comes off the hitch ball, this keeps the dolly connected to the tow automobile even.

Pointer: When towing a lorry cross countries, examine the drawback connection regularly to make sure it is still appropriately connected.

Connect the tow dolly
Action 2: Load the towed automobile. Drive the towed lorry onto the dolly ramp dealing with forward.

Caution: Facing the lorry to the back can trigger the towed automobile to whip and sway.
Guarantee that the whole width of the towed automobile fit on the ramps. Also, inspect all clearances, such as for spoilers, air dams, and other lorry parts while loading.

Load the towed vehicle

Action 3: Protect the towed vehicle. Continue driving onto the dolly till both the front tires are securely against the wheel stops.

Using the tire straps on the tow dolly, front both secure tires.

Loop the towed car security chains around a frame member on the towed lorry. Keep the chains far from fuel and brake lines to prevent damage to these parts.

Step 4: Detach the driveshaft. On four-wheel-drive and rear-wheel-drive automobiles, you require to detach the driveshaft to keep from damaging the transmission of the towed lorry.

You require to crawl beneath the car and find where the driveshaft connects to the differential.

As soon as you have actually found the connection point of the driveshaft and differential, look for the u-joint that holds the driveshaft to the differential housing.

Protect the driveshaft to the undercarriage of the towed car utilizing a strap or bungee cable. Ensure it is protected to a firm part of the frame, but not the exhaust pipes.

Eliminate the four bolts at the u-joint. Next, push the drive shaft up as far as possible, changing the strap or bungee cord as needed.

Screw the bolts back into the yoke on the differential housing. You can position them in a baggie in the glove box till needed once again.

Repeat the above actions for the other axle, such as on a 4 wheel drive, if needed.

Call an expert mechanic to disconnect the driveshaft if you do not feel great in doing the job yourself.

Approach 2 of 3: Utilizing a trailer

Material Needed

  • Nylon straps or wheel nets

Another method of towing a vehicle is to use a trailer. While more secure than other methods, a trailer has its own downsides, the main one that the mix of the towed lorry and trailer might be too heavy for the towing car to manage.

Caution: It is very important that you understand the tow ranking of the tow lorry. Make certain it is ranked to transport the weight of the car and the trailer utilized to carry it.

Material Needed
Step 1: Connect the trailer: First, you should firmly attach the trailer to the drawback ball of the tow vehicle.

Make certain the trailer coupler is safely connected to the drawback by driving the tow lorry forward slightly.

Connect the security chains from the trailer to the tow vehicle.

Link the trailer circuitry harness to the tow vehicle sockets.

Inspect its charge prior to setting out on a journey if the trailer comes with a brake battery.

Action 2: Load the automobile. Next, extend the trailer ramps and drive the towed car onto the trailer.

The towed vehicle and drive it gradually up the ramps.

Continue driving up until the front tires are resting against the tire stops at the front of the trailer.

Location the car in park and set the parking brake.

Load the vehicle

Step 3: Secure the lorry. The last action involves protecting the towed car to the trailer.

Using nylon straps or wheel internet, position the straps over the center of the front tires. Ratchet the strap down till tight.

Fasten the security chains to the front and back of the lorry frame, making certain to prevent brake and fuel lines.

Method 3 of 3: Using a tow bar

Another technique for towing a vehicle is to utilize a tow bar. Tow bars enable all 4 wheels of the towed lorry to rest on the ground while moving. When utilizing a tow bar, you need to disconnect the driveshaft to avoid damaging the transmission. Usually, tow bars are utilized in tandem with a RV to tow a lorry for usage while traveling cross nation.

Caution: Utilizing a tow bar needs that you attach brackets to the front frame of the towed car. Have a professional mechanic or auto body technician attach the brackets for you if you do not feel comfy doing this yourself.

Using a tow bar
Action 1: Secure the brackets. Utilizing the tow bar as a guide, find a strong part of the lorry frame to connect a bracket on each side of the front of the towed car.

This needs you to drill into the frame of your vehicle.

The end result is 2 brackets to which you can attach and remove the tow bar rapidly.

Action 2: Examine the brake lights. Prior to connecting the tow bar, make certain that the brake lights and turn signals of both vehicle operate in tandem, or utilize detachable tail lights.

Purchase a circuitry system that connects and coordinates the brake lights and turn signals of both vehicles. Standard cars us a 12N electrical system for this function, while RVs utilize a 12S electrical system.

If you do not intend on towing the car that often, then you can choose to use removable tail lights. Detachable tail lights attach to the back of the towed car and use the electrical system of the tow lorry for braking and signaling turns.

Step 3: Connect the tow bar. Next, attach the tow bar to the towing automobile.

Start by connecting the tow bar brackets on the towed lorry. You can do this by sliding the bolts through the ends of the tow bar that connect to the brackets attached to the car.

Next, attach the two tow bars coming from the brackets on the towed vehicle to the pivot bracket using the bolt, nuts, and washers that include the tow bar. The pivot bracket connects to the part of the tow bar that either inserts straight into the hitch receiver or has a coupler that connects to the drawback ball.

Further protect the tow bar by connecting security chains from the tow lorry to the pivot bracket and from the base plate of the pivot bracket to the towed car.

You can tow a vehicle safely and quickly by keeping particular preventative measures in mind. This includes properly attaching towing equipment, such as tow dollies, trailers, and tow bars, and making sure that you properly secure vehicles before towing.

You might require to tow a car for a number of factors, consisting of moving, taking your lorry along on a trip, or transporting it to another place. Whatever your reason for towing an automobile, you require to know how to correctly tow it. A tow dolly lets you to tow an automobile while permitting the towed lorry to take some of the load off the towing car. Another method for towing a vehicle is to utilize a tow bar. A lot of frequently, tow bars are used in tandem with a RV to tow a car for usage while traveling cross nation.

Give us a call in Dublin on 087 6555561 today to learn more about our tow services. If you require emergency roadside healing for any reason, we’re here to help you.

The towing source may be a motorized land car, vessel, animal, or human, and the load being anything that can be pulled. Historically, barges were carried along rivers or canals using tow ropes drawn by guys or draught animals walking along towpaths on the banks. Aircraft can tow other aircraft.

Related Articles


You can depend on us if you require emergency car recovery in DUBLIN. All of our drivers are insured and licensed and put the customer. When you call us, you’ll know that we’ll be with you As Soon As Possible in order to get you and your broken down automobile to security. Your vehicle will be totally safe with our DUBLIN towing company, and we can take it to the local garage of your choice. We also offer

Our Videos

Our Office Location:

Areas We Cover

Important Links

Call Now Button Scroll to Top