How does towing a trailer affect car Behaviour?

Towing Dublin ( We offer 24 hr towing roadside support in Dublin and its surrounding areas and a range of automobile rescue services. No matter what the problem is, we will more than happy to send a completely equipped tow truck to you with a experienced and professional tow truck driver to help you.

How to Appropriately Tow an Automobile

You may require to tow a car for a number of factors, including moving, taking your vehicle along on a trip, or transferring it to another area. Whatever your reason for towing a car, you require to understand how to properly tow it. You can use some easy-to-follow guidelines to make the entire towing process simpler.

Caution: Make sure to follow all regional laws, as well as the laws of any other states you intend on taking a trip through when towing a vehicle. This consists of utilizing the appropriate towing lights and mirrors.

Method 1 of 3: Using a tow dolly

A tow dolly lets you to tow a lorry while permitting the towed vehicle to take a few of the load off the towing automobile. This is accomplished by letting the rear wheels rest on the ground while you tow the vehicle. This works better when towing is front wheel drive car, because a rear wheel drive, or four wheel drive, requires you to disconnect the drive shaft while traveling cross countries.

Tip: The automobile you are towing with must weigh, at a minimum, 750 pounds more than the lorry it is towing, plus the towing gadget. Make sure that you do not exceed the tow capacity of the device.

Using a tow dolly
Step 1: Link the tow dolly. Connect the tow dolly coupler to the hitch ball on the towing vehicle.

This needs you to effectively seat the coupler on the drawback ball and hand tighten up the coupler till you have a safe and tight connection.

Examine that the coupler is securely fastened by moving the tow automobile forward a little or pressing the dolly to the back.

Connect the safety chains from the dolly to the tow automobile. This keeps the dolly connected to the tow automobile even if the coupler comes off the drawback ball.

Idea: When towing a car cross countries, examine the drawback connection frequently to make sure it is still appropriately linked.

Connect the tow dolly
Action 2: Load the towed vehicle. Drive the towed vehicle onto the dolly ramp facing forward.

Warning: Facing the lorry to the back can cause the towed automobile to whip and sway.
Ensure that the entire width of the towed car fit on the ramps. Check all clearances, such as for spoilers, air dams, and other automobile parts while filling.

Load the towed vehicle

Action 3: Secure the towed car. Continue driving onto the dolly until both the front tires are firmly versus the wheel stops.

Utilizing the tire straps on the tow dolly, protected both front tires.

Loop the towed lorry security chains around a frame member on the towed car. Keep the chains away from fuel and brake lines to prevent damage to these elements.

Step 4: Disconnect the driveshaft. On four-wheel-drive and rear-wheel-drive cars, you need to detach the driveshaft to keep from harming the transmission of the towed car.

You need to crawl underneath the lorry and locate where the driveshaft connects to the differential.

Look for the u-joint that holds the driveshaft to the differential housing once you have found the connection point of the driveshaft and differential.

Protect the driveshaft to the undercarriage of the towed vehicle using a strap or bungee cable. Ensure it is protected to a firm part of the frame, but not the exhaust pipes.

Remove the 4 bolts at the u-joint. Next, press the drive shaft up as far as possible, adjusting the strap or bungee cord as required.

Screw the bolts back into the yoke on the differential housing. You can place them in a baggie in the glove box until needed once again.

Repeat the above actions for the other axle, such as on a four wheel drive, if needed.

If you do not feel positive in doing the task yourself, call an expert mechanic to disconnect the driveshaft.

Method 2 of 3: Utilizing a trailer

Product Needed

  • Nylon straps or wheel nets

Another approach of towing an automobile is to utilize a trailer. While safer than other methods, a trailer has its own disadvantages, the main one that the combination of the towed lorry and trailer might be too heavy for the towing vehicle to deal with.

Caution: It is important that you know the tow score of the tow automobile. Make certain it is ranked to haul the weight of the lorry and the trailer utilized to carry it.

Material Needed
Step 1: Attach the trailer: First, you must safely attach the trailer to the drawback ball of the tow lorry.

Ensure the trailer coupler is securely attached to the drawback by driving the tow lorry forward somewhat.

Attach the security chains from the trailer to the tow car.

Link the trailer electrical wiring harness to the tow car sockets.

If the trailer comes with a brake battery, check its charge prior to setting out on a journey.

Step 2: Load the automobile. Next, extend the trailer ramps and drive the towed vehicle onto the trailer.

Center the towed car and drive it gradually up the ramps.

Continue driving up until the front tires are resting versus the tire stops at the front of the trailer.

Place the car in park and set the parking brake.

Load the vehicle

Step 3: Protect the automobile. The last action includes protecting the towed car to the trailer.

Using nylon straps or wheel webs, place the straps over the center of the front tires. Ratchet the strap down up until tight.

Fasten the security chains to the front and back of the car frame, making sure to prevent brake and fuel lines.

Approach 3 of 3: Utilizing a tow bar

Another approach for towing a car is to utilize a tow bar. Tow bars permit all 4 wheels of the towed lorry to rest on the ground while moving. When using a tow bar, you need to detach the driveshaft to keep from harming the transmission. Frequently, tow bars are used in tandem with a RV to tow a car for usage while taking a trip cross country.

Caution: Utilizing a tow bar requires that you connect brackets to the front frame of the towed lorry. Have a professional mechanic or auto body specialist attach the brackets for you if you do not feel comfortable doing this yourself.

Using a tow bar
Step 1: Protect the brackets. Using the tow bar as a guide, discover a strong part of the vehicle frame to connect a bracket on each side of the front of the towed lorry.

This requires you to drill into the frame of your automobile.

Completion outcome is 2 brackets to which you can remove the tow and connect bar rapidly.

Step 2: Examine the brake lights. Before hooking up the tow bar, make certain that the brake lights and turn signals of both automobile operate in tandem, or utilize removable tail lights.

Purchase a circuitry system that links and collaborates the brake lights and turn signals of both vehicles. Basic lorries us a 12N electrical system for this purpose, while RVs utilize a 12S electrical system.

You can decide to utilize removable tail lights if you do not plan on towing the lorry that frequently. Detachable tail lights connect to the back of the towed vehicle and use the electrical system of the tow vehicle for braking and signaling turns.

Step 3: Attach the tow bar. Next, attach the tow bar to the towing vehicle.

Start by connecting the tow bar brackets on the towed vehicle. You can do this by moving the bolts through the ends of the tow bar that attach to the brackets attached to the car.

Next, attach the two tow bars coming from the brackets on the towed car to the pivot bracket using the bolt, nuts, and washers that feature the tow bar. The pivot bracket connects to the part of the tow bar that either inserts directly into the drawback receiver or has a coupler that connects to the drawback ball.

Further secure the tow bar by connecting security chains from the tow automobile to the pivot bracket and from the base plate of the pivot bracket to the towed vehicle.

You can tow a car safely and easily by keeping specific preventative measures in mind. This consists of properly connecting towing equipment, such as tow dollies, trailers, and tow bars, and making sure that you properly safe automobiles prior to towing.

You may require to tow a vehicle for a number of reasons, consisting of moving, taking your automobile along on a journey, or carrying it to another place. Whatever your factor for towing a vehicle, you need to know how to properly tow it. A tow dolly lets you to tow a vehicle while enabling the towed vehicle to take some of the load off the towing lorry. Another technique for towing an automobile is to use a tow bar. A lot of frequently, tow bars are utilized in tandem with a Recreational Vehicle to tow a car for usage while traveling cross nation.

Give us a call in Dublin on 087 6555561 today for more information about our tow services. If you need emergency situation roadside healing for any reason, we’re here to assist you.

The towing source might be a motorized land automobile, vessel, animal, or human, and the load being anything that can be pulled. Historically, barges were carried along canals or rivers using tow ropes drawn by males or draught animals walking along towpaths on the banks. Aircraft can tow other aircraft.

Related Articles


If you need emergency car recovery in DUBLIN, you can depend on us. All of our chauffeurs are insured and licensed and put the consumer. When you call us, you’ll know that we’ll be with you As Soon As Possible in order to get you and your broken down vehicle to safety. Your car will be totally safe with our DUBLIN towing business, and we can take it to the local garage of your choice. We likewise use

Our Videos

Our Office Location:

Areas We Cover

Important Links

Call Now Button Scroll to Top