tow

Can you tow a car that doesn’t start?

Towing Dublin (Towing247.ie): We offer 24 hr towing roadside help in Dublin and its surrounding areas and a variety of automobile rescue services. No matter what the problem is, we will more than happy to send out a completely equipped tow truck to you with a qualified and professional tow truck driver to help you.

How to Properly Tow a Lorry

You might need to tow an automobile for a variety of reasons, including moving, taking your car along on a trip, or transporting it to another place. Whatever your factor for towing an automobile, you need to understand how to effectively tow it. You can use some easy-to-follow standards to make the entire towing procedure much easier.

Warning: Make certain to follow all regional laws, as well as the laws of any other states you plan on traveling through when towing a vehicle. This includes utilizing the suitable towing lights and mirrors.

Approach 1 of 3: Utilizing a tow dolly

A tow dolly lets you to tow a car while enabling the towed automobile to take some of the load off the towing lorry. This is accomplished by letting the rear wheels rest on the ground while you tow the vehicle. This works better when towing is front wheel drive vehicle, since a rear wheel drive, or four wheel drive, needs you to detach the drive shaft while traveling fars away.

Idea: The vehicle you are towing with must weigh, at a minimum, 750 pounds more than the car it is towing, plus the towing device. Ensure that you do not surpass the tow capability of the device.

Using a tow dolly
Step 1: Connect the tow dolly. Connect the tow dolly coupler to the drawback ball on the towing lorry.

This requires you to appropriately seat the coupler on the hitch ball and hand tighten the coupler until you have a protected and tight connection.

Inspect that the coupler is firmly attached by moving the tow car forward slightly or pushing the dolly to the rear.

Connect the security chains from the dolly to the tow vehicle. This keeps the dolly linked to the tow automobile even if the coupler comes off the drawback ball.

Idea: When towing a car fars away, check the hitch connection regularly to make certain it is still properly linked.

Connect the tow dolly
Action 2: Load the towed lorry. Drive the towed lorry onto the dolly ramp facing forward.

Caution: Dealing with the vehicle to the back can cause the towed car to whip and sway.
Make sure that the entire width of the towed vehicle fit on the ramps. Also, inspect all clearances, such as for spoilers, air dams, and other lorry parts while packing.

Load the towed vehicle

Step 3: Protect the towed car. Continue driving onto the dolly till both the front tires are strongly versus the wheel stops.

Utilizing the tire straps on the tow dolly, safe and secure both front tires.

Loop the towed car security chains around a frame member on the towed automobile. Keep the chains away from fuel and brake lines to prevent damage to these components.

Step 4: Disconnect the driveshaft. On four-wheel-drive and rear-wheel-drive lorries, you require to detach the driveshaft to keep from harming the transmission of the towed vehicle.

You need to crawl underneath the car and find where the driveshaft connects to the differential.

Once you have discovered the connection point of the driveshaft and differential, look for the u-joint that holds the driveshaft to the differential real estate.

Protect the driveshaft to the undercarriage of the towed lorry utilizing a strap or bungee cord. Make sure it is secured to a firm part of the frame, but not the exhaust pipes.

Remove the four bolts at the u-joint. Next, push the drive shaft up as far as possible, changing the strap or bungee cord as required.

Screw the bolts back into the yoke on the differential real estate. You can place them in a baggie in the glove box till required once again.

Repeat the above actions for the other axle, such as on a four wheel drive, if required.

Call an expert mechanic to disconnect the driveshaft if you do not feel great in doing the job yourself.

Technique 2 of 3: Utilizing a trailer

Product Needed

  • Nylon straps or wheel nets

Another approach of towing an automobile is to use a trailer. While much safer than other approaches, a trailer has its own disadvantages, the main one that the mix of the towed vehicle and trailer might be too heavy for the towing lorry to handle.

Caution: It is essential that you understand the tow ranking of the tow car. Ensure it is rated to transport the weight of the automobile and the trailer utilized to haul it.

Material Needed
Action 1: Connect the trailer: First, you should firmly connect the trailer to the hitch ball of the tow automobile.

Make sure the trailer coupler is safely connected to the drawback by driving the tow car forward a little.

Attach the security chains from the trailer to the tow automobile.

Connect the trailer wiring harness to the tow vehicle sockets.

Inspect its charge prior to setting out on a trip if the trailer comes with a brake battery.

Action 2: Load the lorry. Next, extend the trailer ramps and drive the towed automobile onto the trailer.

Center the towed vehicle and drive it slowly up the ramps.

Continue driving up until the front tires are resting against the tire stops at the front of the trailer.

Location the automobile in park and set the parking brake.

Load the vehicle

Step 3: Protect the lorry. The last action involves securing the towed vehicle to the trailer.

Using nylon straps or wheel webs, place the straps over the center of the front tires. Ratchet the strap down up until tight.

Secure the security chains to the front and back of the automobile frame, ensuring to prevent brake and fuel lines.

Method 3 of 3: Utilizing a tow bar

Another method for towing a car is to utilize a tow bar. Tow bars allow all four wheels of the towed lorry to rest on the ground while moving. When utilizing a tow bar, you need to detach the driveshaft to keep from damaging the transmission. Most often, tow bars are used in tandem with a RV to tow a lorry for use while traveling cross country.

Caution: Using a tow bar requires that you connect brackets to the front frame of the towed vehicle. If you do not feel comfortable doing this yourself, have a professional mechanic or car body service technician attach the brackets for you.

Using a tow bar
Step 1: Secure the brackets. Using the tow bar as a guide, discover a strong part of the lorry frame to attach a bracket on each side of the front of the towed vehicle.

This needs you to drill into the frame of your automobile.

The end result is two brackets to which you can remove the tow and attach bar rapidly.

Step 2: Inspect the brake lights. Prior to connecting the tow bar, ensure that the brake lights and turn signals of both vehicle operate in tandem, or use detachable tail lights.

Purchase a wiring system that connects and collaborates the brake lights and turn signals of both automobiles. Basic vehicles us a 12N electrical system for this function, while RVs use a 12S electrical system.

You can decide to utilize detachable tail lights if you do not plan on towing the vehicle that frequently. Removable tail lights attach to the rear of the towed vehicle and utilize the electrical system of the tow automobile for braking and indicating turns.

Action 3: Attach the tow bar. Next, attach the tow bar to the towing automobile.

Start by attaching the tow bar brackets on the towed automobile. You can do this by sliding the bolts through the ends of the tow bar that connect to the brackets connected to the car.

Next, attach the two tow bars originating from the brackets on the towed automobile to the pivot bracket utilizing the bolt, nuts, and washers that feature the tow bar. The pivot bracket links to the part of the tow bar that either inserts straight into the hitch receiver or has a coupler that connects to the drawback ball.

Further protect the tow bar by attaching safety chains from the tow car to the pivot bracket and from the base plate of the pivot bracket to the towed vehicle.

You can tow a lorry securely and easily by keeping certain precautions in mind. This consists of effectively attaching towing equipment, such as tow dollies, trailers, and tow bars, and ensuring that you correctly secure automobiles before towing.

You might require to tow a car for a number of factors, including moving, taking your automobile along on a trip, or transferring it to another place. Whatever your factor for towing a car, you require to know how to effectively tow it. A tow dolly lets you to tow a vehicle while enabling the towed vehicle to take some of the load off the towing vehicle. Another approach for towing an automobile is to use a tow bar. Most often, tow bars are utilized in tandem with a RV to tow a car for use while taking a trip cross nation.

Give us a call in Dublin on 087 6555561 today to get more information about our tow services. If you require emergency situation roadside recovery for any reason, we’re here to assist you.

The towing source might be a motorized land vehicle, vessel, animal, or human, and the load being anything that can be pulled. Historically, barges were transported along rivers or canals utilizing tow ropes drawn by men or draught animals strolling along towpaths on the banks. Airplane can tow other aircraft.

Related Articles

REQUIRED CAR TOWING IN DUBLIN?

You can depend on us if you need emergency situation car recovery in DUBLIN. Your car will be entirely safe with our DUBLIN towing business, and we can take it to the local garage of your option.

Our Videos

Our Office Location:

Areas We Cover

Important Links

Call Now Button Scroll to Top