What size truck Do I require to pull a fifth wheel?

Towing Dublin ( We provide 24 hours towing roadside assistance in Dublin and its surrounding areas and a series of lorry rescue services. No matter what the problem is, we will more than happy to send out a fully equipped tow truck to you with a experienced and expert tow truck driver to help you.

How to Effectively Tow a Car

You might require to tow a vehicle for a variety of factors, consisting of moving, taking your automobile along on a trip, or carrying it to another area. Whatever your factor for towing a lorry, you need to know how to properly tow it. You can use some easy-to-follow guidelines to make the entire towing process simpler.

Caution: Make sure to follow all local laws, as well as the laws of any other states you intend on traveling through when towing a car. This consists of utilizing the proper towing lights and mirrors.

Technique 1 of 3: Using a tow dolly

A tow dolly lets you to tow an automobile while permitting the towed car to take a few of the load off the towing automobile. This is accomplished by letting the rear wheels rest on the ground while you tow the lorry. This works much better when towing is front wheel drive automobile, given that a rear wheel drive, or 4 wheel drive, needs you to detach the drive shaft while traveling fars away.

Tip: The lorry you are towing with should weigh, at a minimum, 750 pounds more than the automobile it is towing, plus the towing gadget. Make sure that you do not surpass the tow capacity of the device.

Using a tow dolly
Step 1: Link the tow dolly. Connect the tow dolly coupler to the drawback ball on the towing car.

This requires you to appropriately seat the coupler on the drawback ball and hand tighten up the coupler until you have a tight and protected connection.

Check that the coupler is firmly fastened by moving the tow vehicle forward somewhat or pushing the dolly to the rear.

Attach the security chains from the dolly to the tow automobile. This keeps the dolly connected to the tow automobile even if the coupler comes off the drawback ball.

Pointer: When towing an automobile long distances, inspect the drawback connection regularly to make certain it is still effectively linked.

Connect the tow dolly
Action 2: Load the towed automobile. Drive the towed car onto the dolly ramp facing forward.

Warning: Facing the car to the rear can trigger the towed vehicle to whip and sway.
Ensure that the whole width of the towed car fit on the ramps. Likewise, examine all clearances, such as for spoilers, air dams, and other car parts while packing.

Load the towed vehicle

Step 3: Secure the towed lorry. Continue driving onto the dolly till both the front tires are strongly versus the wheel stops.

Using the tire straps on the tow dolly, front both safe and secure tires.

Loop the towed automobile security chains around a frame member on the towed automobile. Keep the chains far from fuel and brake lines to prevent damage to these components.

Step 4: Detach the driveshaft. On four-wheel-drive and rear-wheel-drive vehicles, you need to disconnect the driveshaft to avoid damaging the transmission of the towed automobile.

You require to crawl beneath the vehicle and find where the driveshaft links to the differential.

When you have found the connection point of the driveshaft and differential, try to find the u-joint that holds the driveshaft to the differential housing.

Protect the driveshaft to the undercarriage of the towed automobile utilizing a strap or bungee cable. Make certain it is secured to a firm part of the frame, however not the exhaust pipes.

Remove the four bolts at the u-joint. Next, press the drive shaft up as far as possible, adjusting the strap or bungee cord as needed.

Screw the bolts back into the yoke on the differential real estate. Additionally, you can position them in a baggie in the glove box until needed once again.

Repeat the above actions for the other axle, such as on a four wheel drive, if needed.

Call a specialist mechanic to disconnect the driveshaft if you do not feel confident in doing the job yourself.

Method 2 of 3: Using a trailer

Material Needed

  • Nylon straps or wheel nets

Another approach of towing an automobile is to use a trailer. While more secure than other approaches, a trailer has its own downsides, the primary one that the combination of the towed automobile and trailer might be too heavy for the towing lorry to manage.

Warning: It is important that you know the tow rating of the tow car. Make sure it is rated to haul the weight of the car and the trailer used to carry it.

Material Needed
Action 1: Connect the trailer: First, you need to securely connect the trailer to the drawback ball of the tow lorry.

Make certain the trailer coupler is securely connected to the hitch by driving the tow lorry forward slightly.

Attach the safety chains from the trailer to the tow car.

Link the trailer wiring harness to the tow vehicle sockets.

If the trailer features a brake battery, inspect its charge before setting out on a trip.

Step 2: Load the car. Next, extend the trailer ramps and drive the towed vehicle onto the trailer.

The towed vehicle and drive it slowly up the ramps.

Continue driving up until the front tires are resting against the tire stops at the front of the trailer.

Place the automobile in park and set the parking brake.

Load the vehicle

Step 3: Secure the car. The last action involves protecting the towed car to the trailer.

Using nylon straps or wheel internet, place the straps over the center of the front tires. Ratchet the strap down till tight.

Attach the security chains to the front and back of the automobile frame, ensuring to prevent brake and fuel lines.

Technique 3 of 3: Utilizing a tow bar

Another approach for towing an automobile is to use a tow bar. Tow bars enable all four wheels of the towed vehicle to rest on the ground while moving. When using a tow bar, you need to detach the driveshaft to avoid damaging the transmission. Usually, tow bars are utilized in tandem with a Recreational Vehicle to tow a car for usage while traveling cross country.

Warning: Using a tow bar needs that you attach brackets to the front frame of the towed car. If you do not feel comfy doing this yourself, have a professional mechanic or car body service technician attach the brackets for you.

Using a tow bar
Step 1: Secure the brackets. Using the tow bar as a guide, find a strong part of the car frame to connect a bracket on each side of the front of the towed automobile.

This needs you to drill into the frame of your automobile.

The end result is 2 brackets to which you can separate the tow and connect bar quickly.

Step 2: Check the brake lights. Before connecting the tow bar, ensure that the brake lights and turn signals of both car work in tandem, or utilize detachable tail lights.

Purchase an electrical wiring system that links and collaborates the brake lights and turn signals of both cars. Basic automobiles us a 12N electrical system for this function, while RVs use a 12S electrical system.

If you do not intend on towing the automobile that frequently, then you can choose to use detachable tail lights. Detachable tail lights attach to the rear of the towed lorry and utilize the electrical system of the tow car for braking and indicating turns.

Step 3: Connect the tow bar. Next, connect the tow bar to the towing vehicle.

Start by connecting the tow bar brackets on the towed vehicle. You can do this by sliding the bolts through the ends of the tow bar that connect to the brackets attached to the car.

Next, connect the two tow bars coming from the brackets on the towed lorry to the pivot bracket utilizing the bolt, nuts, and washers that include the tow bar. The pivot bracket connects to the part of the tow bar that either inserts straight into the drawback receiver or has a coupler that attaches to the drawback ball.

Further secure the tow bar by connecting security chains from the tow lorry to the pivot bracket and from the base plate of the pivot bracket to the towed car.

You can tow an automobile safely and quickly by keeping particular preventative measures in mind. This includes appropriately attaching towing equipment, such as tow dollies, trailers, and tow bars, and ensuring that you appropriately safe and secure cars prior to towing.

You may need to tow an automobile for a number of factors, consisting of moving, taking your automobile along on a trip, or transporting it to another place. Whatever your reason for towing a car, you need to understand how to correctly tow it. A tow dolly lets you to tow a lorry while allowing the towed automobile to take some of the load off the towing automobile. Another approach for towing a car is to use a tow bar. Many frequently, tow bars are utilized in tandem with a Recreational Vehicle to tow a vehicle for use while traveling cross nation.

Give us a call in Dublin on 087 6555561 today to find out more about our tow services. If you require emergency roadside recovery for any reason, we’re here to help you.

The towing source might be a motorized land lorry, vessel, animal, or human, and the load being anything that can be pulled. Historically, barges were transported along canals or rivers using tow ropes drawn by guys or draught animals walking along towpaths on the banks. Aircraft can tow other airplane.

Related Articles


If you need emergency car recovery in DUBLIN, you can depend on us. All of our drivers are licensed and insured and put the client. When you call us, you’ll understand that we’ll be with you As Soon As Possible in order to get you and your broken down automobile to security. Your automobile will be totally safe with our DUBLIN towing business, and we can take it to the regional garage of your option. We likewise offer

Our Videos

Our Office Location:

Areas We Cover

Important Links

Call Now Button Scroll to Top